xi
> About the Operation Guide (this Guide)
Conventions used in procedures for operating the machine
In this Operation Guide, continuous operation is as follows:
Size and Orientation of Paper
Paper sizes such as A5 can be used in both the horizontal and vertical orientations. To distinguish the orientations when
these sizes are used, "R" is added to sizes used in the vertical orientation.
Actual procedure Procedure indicated in this guide
Select the [Menu] key.
Select the [▲] or [] key to select [Device Common].
Select the
[►] key.
[Menu] key > [▲] [] key > [Device Common] > [►] key
Orientation Setting Position
(X=Length, Y=Width)
Indicated size in this Guide
*1
*1 Paper sizes that can be used vary depending on the function and source tray. For details, refer to the following.
Specifications (page 9-16)
Vertical orientation (-R) Cassette A5-R
Multipurpose tray A5-R
Horizontal orientation Cassette A5
Multipurpose tray A5
To Next Page
Loading...
