Kyocera ECOSYS P2040dn

6-10
Setup and Registration (System Menu) > System Menu
Wi-Fi Direct Set
[Menu] key > [▲] [▼] key > [Wi-Fi Direct Set] > [►] key
Set Wi-Fi Direct.
Wi-Fi Direct
Wi-Fi Settings
[Menu] key > [▲] [▼] key > [Wi-Fi Settings] > [►] key
Set Wi-Fi.
Wi-Fi
Quick Setup
NOTE
This function is displayed when the wireless network function is available on the machine.
Item Description
Wi-Fi Direct Select whether to use Wi-Fi Direct.
Value: Off, On
Auto Disconnect Automatically disconnect devices connected through Wi-Fi Direct.
Value: Off, On
NOTE
This function is displayed when [Wi-Fi Direct] is set to [On].
Timer (Day:Hour:Min) If you select [ON] to Auto Disconnect, set the waiting time for automatic disconnection.
Value: Day (00 to 99), Hour (00 to 23), Minute (00 to 59)
NOTE
This function is displayed when the wireless network function is available on the machine.
Item Description
Wi-Fi Select whether to use Wi-Fi.
Value: Off, On
Item Description
Quick Setup If the machine will connect to an access point that supports the automatic wireless network
setup, connection settings can be configured by Quick Setup.
Push Button If the access point supports the push button method, wireless settings can be configured using
the push button. This setting executes push button, and the connection is started by pressing
the push button on the access point.
NOTE
The push button method supports only the WPS.
PIN(Device) Starts connection using the machine's PIN code. Enter the PIN code into the access point. The
PIN code of the machine is automatically generated.