EasyManuals Logo

Kyocera ECOSYS P2040dw User Manual

Kyocera ECOSYS P2040dw
242 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #181 background imageLoading...
Page #181 background image
8-12
Troubleshooting > Troubleshooting
Printouts are curled. Turn the paper over in the cassette, or
turn the orientation 180 degrees around
in which the paper is positioned.
page 3-2
Is the paper damp? Replace the paper with new paper. page 3-2
I can't install the printer
driver.
Are you trying to install the driver using
a host name with Wi-Fi or Wi-Fi Direct
enabled?
Specify an IP address instead of a host
name.
Cannot print. Is the machine plugged in? Plug the power cord into an AC outlet.
Is the machine powered on? Turn on the power switch. page 2-9
Are the USB cable and network cable
connected?
Connect the correct USB cable and
network cable securely.
page 2-7
Cannot print with USB
memory.
USB memory not
recognized.
Is the USB host blocked? Select [Unblock] in the USB host
settings.
page 6-22
Check that the USB memory is securely
plugged into the machine.
While "Auto-IP" is set to
[On], the IP address is not
assigned automatically.
Is a value other than "0.0.0.0" entered
for the IP address of TCP/IP(v4)?
Enter "0.0.0.0" for the IP address of
TCP/IP(v4).
page 2-17
The machine is emitting
steam in the area around the
paper ejection slot.
Check the room temperature to see if it
is low, or if damp paper was used.
Depending on the printing environment
and the paper's condition, the heat
generated during printing will cause the
moisture in the paper to evaporate, and
the steam emitted may look like smoke.
This is not a problem, and you can
continue printing. If the steam concerns
you, raise the room temperature, or
replace the paper with a newer, dryer
paper.
Symptom Checkpoints Corrective Actions
Reference
Page

Table of Contents

Other manuals for Kyocera ECOSYS P2040dw

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kyocera ECOSYS P2040dw and is the answer not in the manual?

Kyocera ECOSYS P2040dw Specifications

General IconGeneral
Processor familyARM Cortex
Built-in processorYes
Compatible memory cardsSD, SDHC
Sound pressure level (printing)48.8 dB
Sound pressure level (quiet mode)45.5 dB
ColorNo
Print technologyLaser
Duplex printing modeAuto
Time to first page (black, normal)6.4 s
Print speed (black, normal quality, A4/US Letter)40 ppm
Duplex print speed (black, normal quality, A4/US Letter)20 ppm
Printing colorsBlack
Maximum duty cycle50000 pages per month
Recommended duty cycle2000 - 3000 pages per month
Replacement cartridgesTK-1160 (7.200 pagina's)
Number of print cartridges1
Page description languagesEpson LQ, IBM ProPrinter, PCL 5e, PCL 6, PCL XL, PDF 1.7, PostScript 3, XPS
DisplayLCD
CertificationTÜV-GS, CE
Product colorBlack, White
Market positioningHome & office
Display number of lines2 lines
AC input voltage220 - 240 V
AC input frequency50 Hz
Power consumption (ready)8 W
Power consumption (printing)620 W
Power consumption (PowerSave)0.8 W
Energy Star Typical Electricity Consumption (TEC)1.6 kWh/week
Total input capacity250 sheets
Maximum input capacity850 sheets
Maximum number of input trays3
Multi-Purpose tray input capacity100 sheets
Custom media width70 - 216 mm
Maximum print size216 x 356 mm
Custom media length148 - 356 mm
Paper tray media typesPlain paper
Paper tray media weight60 - 163 g/m²
Non-ISO print media sizesLegal (media size), Letter (media size)
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5, B6
Maximum ISO A-series paper sizeA4
Multi-Purpose Tray media weight60 - 220 g/m²
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Cabling technology10/100/1000Base-T(X)
Security algorithms802.1x RADIUS, HTTPS, IPPS, IPSEC, SNMP
Ethernet LAN data rates10, 100, 1000 Mbit/s
Mobile printing technologiesApple AirPrint, Google Cloud Print, Kyocera Mobile Print, Mopria Print Service
Standard interfacesEthernet, USB 2.0, Wireless LAN
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Sustainability certificatesBlue Angel, ENERGY STAR
Package depth516 mm
Package width500 mm
Package height400 mm
Package weight18000 g
Cables includedAC
Included cartridge capacity (black)3600 pages
Harmonized System (HS) code84433210
Weight and Dimensions IconWeight and Dimensions
Depth393 mm
Width375 mm
Height272 mm

Related product manuals