What to do if Kyocera Printer cannot print with USB memory?
If your Kyocera printer does not recognize the USB memory, first select Unblock in the USB host settings. Next, ensure the USB memory is securely plugged into the machine.
What to do if Kyocera ECOSYS P3060dn Printer printouts are wrinkled?
If your Kyocera printer prints wrinkled pages, make sure the paper is loaded correctly. Try also turning the paper orientation 180 degrees. If the paper is damp, replace it with new paper.
Why is my Kyocera ECOSYS P3060dn Printer emitting steam?
If your Kyocera printer is emitting steam, this is usually due to moisture in the paper evaporating during printing, especially in low room temperatures or with damp paper. This is generally not a problem, and you can continue printing. If the steam concerns you, raise the room temperature or use newer, dryer paper.
General| Duplex printing | Yes |
|---|---|
| Print technology | Laser |
| Maximum resolution | 1200 x 1200 DPI |
| Duplex printing mode | Auto |
| Time to first page (black, normal) | 4.9 s |
| Print speed (black, normal quality, A4/US Letter) | 60 ppm |
| Printing colors | Black |
| Maximum duty cycle | - pages per month |
| Number of print cartridges | 1 |
| Page description languages | Epson LQ, IBM ProPrinter XL24E, PCL 5c, PCL 6, PCL XL, PDF 1.7, PostScript 3, XPS |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Power consumption (off) | 0.8 W |
| Power consumption (ready) | 11 W |
| Power consumption (printing) | 684 W |
| Wi-Fi | - |
| Security algorithms | HTTPS, IPPS, IPSEC, SSL/TLS |
| Mobile printing technologies | Apple AirPrint, Google Cloud Print, Kyocera Mobile Print, Mopria Print Service |
| Display | LED |
| Certification | TÜV-GS, CE ISO 9001 ISO 14001 |
| Product color | Black, White |
| Display number of lines | 5 lines |
| Paper input type | Cassette, Paper tray |
| Total input capacity | 500 sheets |
| Total output capacity | - sheets |
| Maximum input capacity | 2600 sheets |
| Maximum number of input trays | 6 |
| Multi-Purpose tray input capacity | 100 sheets |
| Noise level (ready) | 27.1 dB |
| Maximum internal memory | 2560 MB |
| Sound pressure level (printing) | 56 dB |
| Sound pressure level (quiet mode) | 51.5 dB |
| Custom media width | 70 - 216 mm |
| Custom media length | 148 - 356 mm |
| Duplex media weight | 60 - 120 g/m² |
| Maximum media length | 915 mm |
| Paper tray media types | Banner, Plain paper |
| Non-ISO print media sizes | Letter |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5 |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 220 g/m² |
| Standard interfaces | Ethernet, USB 2.0 |
| USB 2.0 ports quantity | 2 |
| Other operating systems supported | Android, iOS |
| Sustainability certificates | ENERGY STAR |
Weight and Dimensions| Depth | 416 mm |
|---|---|
| Width | 380 mm |
| Height | 320 mm |
Lists the printer models covered by this service manual, identified by print speed.
Lists optional equipment such as PF-320 and PF-3100 paper feeders.
Provides general safety warnings and precautions for service personnel during maintenance.
Explains the meaning of safety symbols used in the manual, including DANGER, WARNING, CAUTION.
Details safety warnings and cautions specific to printer installation.
Details safety warnings and cautions specific to printer maintenance procedures.
Provides general safety warnings related to drum handling, solvents, and flammable materials.
Details the steps and procedures for upgrading the printer's firmware.
Provides remarks and notes related to replacing Printed Wiring Boards (PWBs).
Provides comprehensive specifications including printing speeds, paper handling, and dimensions.
Details specifications for optional accessories like paper feeders, SSD, and interface kits.
Identifies components located at the front and right side of the printer.
Identifies components located at the front and left side of the printer.
Identifies the internal components of the printer.
Identifies components located at the rear of the printer.
Identifies parts of the printer's operation panel and controls.
Illustrates the internal layout and components of the 60/55/50 ppm model.
Illustrates the internal layout and components of the 45 ppm model.
Specifies the environmental conditions and location requirements for printer installation.
Details the procedure for unpacking the printer and performing the initial installation steps.
Provides instructions for installing optional units and accessories.
Illustrates the various optional units and their composition.
Explains how to enter and execute the service mode for maintenance functions.
Describes available functions within the service mode, such as status page printing.
Details how to print service status pages to view diagnostic and configuration information.
Provides instructions on how to reset the life counter for maintenance kits.
Explains the procedure for refreshing the drum surface to improve print quality.
Describes the process for initializing a new developing unit after replacement.
Explains how the printer detects and indicates paper misfeeds and lists jam locations.
Details the self-diagnostic function, error messages, and diagnostic codes for troubleshooting.
Describes common image formation issues like streaks, spots, and blurred prints.
Troubleshoots electrical issues such as non-operational motors, clutches, and switches.
Addresses mechanical issues like paper feed failures, jams, and abnormal noises.
Provides essential safety precautions before starting assembly or disassembly tasks.
Details the procedure for detaching and refitting the printer's outer covers.
Explains how to detach and refit components within the paper feed section.
Details the procedure for detaching and refitting the developer unit.
Details the procedure for detaching and refitting the drum unit and charger roller.
Details the procedure for detaching and refitting the transfer roller and separation needle units.
Details the procedure for detaching and refitting the laser scanner unit.
Details the procedure for detaching and refitting the fuser unit.
Details the procedure for detaching and refitting the ejection unit.
Details the procedures for detaching and refitting various PWBs (Main, Engine, Relay-L, etc.).
Details the removal and installation of other components like motors and fans.
Explains the mechanical construction of the paper feed and conveying sections.
Describes the components of the drum section, including the charger roller and cleaning unit.
Describes the developer unit, its components, and the toner sensor.
Describes the laser scanner unit and its optical components.
Explains the components and function of the transfer roller and separation electrode.
Describes the fuser section, including the heat roller, press roller, and thermistors.
Identifies the components of the paper eject and feedshift paths.
Identifies the components of the duplex paper conveying path.
Lists and describes the main PWBs and their functions within the printer.
Identifies and describes the various switches and sensors used in the printer.
Identifies and describes the function of each motor in the printer.
Identifies and describes clutches, solenoids, and other electrical components.
Provides the silk-screen diagram and photograph of the Main PWB.
Details connectors and signals for SD card, USB, eKUIO, and Ethernet interfaces.
Provides the silk-screen diagram and photograph of the Engine PWB.
Provides the silk-screen diagram and photograph of the Power Source PWB.
Provides the silk-screen diagram and photograph of the Relay-L PWB.
Provides the silk-screen diagram and photograph of the High Voltage PWB.
Lists maintenance kits, their service names, part numbers, and alternatives.
Provides a gauge for measuring repetitive defects on various rollers.
Explains how to use FRPO commands for reprogramming firmware parameters.
Explains how to use maintenance commands for adjusting print start timing.
Provides wiring diagrams for different printer models (60/55/50 ppm and 45ppm).
Illustrates the step-by-step procedure for installing the PF-320 paper feeder.
Details the step-by-step procedure for installing the PF-3100 bulk paper feeder.
Provides installation instructions for the SSD (HD-6/HD-7) including precautions.
Provides installation instructions and precautions for the IB-32B parallel interface kit.
Provides installation instructions and precautions for the IB-50 network interface kit.
Provides installation instructions and precautions for the IB-51 wireless network interface kit.
Illustrates the step-by-step procedure for installing the PF-3100.
Provides detailed specifications for paper types, sizes, and handling for the PF-320.
Details the unpacking and installation procedures for the paper feeder.
Provides instructions on loading paper, envelopes, and postcards into the paper feeder.
Explains how paper misfeeds are detected and indicated on the printer.
Details the self-diagnostic function and lists error codes for paper feeder issues.
Troubleshoots electrical issues related to paper feed sensors, size detection, and motors.
Addresses mechanical issues in the paper feeder, such as paper feed failures and jams.
Provides essential safety precautions before starting assembly or disassembly of the PF-320.
Details the procedure for removing the bulk paper feeder and its components.
Details the procedure for removing the drive unit and PF main PWB.
Explains the paper feed section and the Friction Retarded Roller (FRR) system.
Identifies the main electrical components within the bulk paper feeder.
Identifies the electrical parts located on the PB-325 unit.
Shows the block diagram of the main PWB and its connections to feeder components.
Details connectors and signals for the printer and paper feed sensor interfaces.
Details connectors and signals for paper feed motor and tray elevation motor.
Provides the wiring diagram for the PF-320 paper feeder's main PWB.
To Next Page
