What to do if Kyocera ECOSYS P3050dn cannot print with USB memory?
If your Kyocera printer does not recognize the USB memory, first select Unblock in the USB host settings. Next, ensure the USB memory is securely plugged into the machine.
What to do if Kyocera ECOSYS P3050dn printouts are wrinkled?
If your Kyocera printer prints wrinkled pages, make sure the paper is loaded correctly. Try also turning the paper orientation 180 degrees. If the paper is damp, replace it with new paper.
Why is my Kyocera ECOSYS P3050dn emitting steam?
If your Kyocera printer is emitting steam, this is usually due to moisture in the paper evaporating during printing, especially in low room temperatures or with damp paper. This is generally not a problem, and you can continue printing. If the steam concerns you, raise the room temperature or use newer, dryer paper.
General| Color | No |
|---|---|
| Duplex printing | Yes |
| Print technology | Laser |
| Maximum resolution | 1200 x 1200 DPI |
| Duplex printing mode | Auto/Manual |
| Time to first page (black, normal) | 6.2 s |
| Print speed (black, normal quality, A4/US Letter) | 50 ppm |
| Printing colors | Black |
| Maximum duty cycle | - pages per month |
| Number of print cartridges | 1 |
| Page description languages | Epson LQ, IBM ProPrinter XL24E, PCL 5c, PCL 6, PCL XL, PDF 1.7, PostScript 3, XPS |
| AC input voltage | 220 V |
| AC input frequency | 50 Hz |
| Power consumption (off) | 0.9 W |
| Power consumption (ready) | 11 W |
| Power consumption (printing) | 636 W |
| Internal memory | 512 MB |
| Noise level (ready) | 26.9 dB |
| Maximum internal memory | 2560 MB |
| Sound pressure level (printing) | 53.2 dB |
| Sound pressure level (quiet mode) | 50.8 dB |
| Display | LED |
| Certification | TÜV-GS, CE |
| Product color | Black, White |
| Display number of lines | 5 lines |
| Wi-Fi | - |
| Security algorithms | HTTPS, IPPS, IPSEC, SSL/TLS |
| Mobile printing technologies | Apple AirPrint, Google Cloud Print, Kyocera Mobile Print, Mopria Print Service |
| Custom media width | 70 - 216 mm |
| Custom media length | 148 - 356 mm |
| Duplex media weight | 60 - 120 g/m² |
| Maximum media length | 915 mm |
| Paper tray media types | Banner, Plain paper |
| Non-ISO print media sizes | Letter |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5 |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 220 g/m² |
| Paper input type | Cassette, Paper tray |
| Total output capacity | - sheets |
| Maximum input capacity | 2600 sheets |
| Multi-Purpose tray input capacity | 100 sheets |
| Standard interfaces | Ethernet, USB 2.0 |
| USB 2.0 ports quantity | 2 |
| Other operating systems supported | Android, iOS |
| Sustainability certificates | ENERGY STAR |
Weight and Dimensions| Depth | 416 mm |
|---|---|
| Width | 380 mm |
| Height | 320 mm |
Details the terms for GPL and LGPL software used in the firmware.
Specifies the terms and conditions for the OpenSSL Toolkit software.
Explains the printer's automatic power-saving sleep modes.
Describes the Energy Saver mode for further power reduction.
Information on the printer's Class 1 laser safety certification.
Details the US CDRH regulations applicable to laser products.
Identifies components located on the front and right side of the printer.
Details the internal parts of the printer.
Identifies components located on the rear side of the printer.
Details the controls and display elements of the printer's interface.
Configuration of TCP/IP, IPv6, and other network protocol settings.
Explains procedures for setting up wireless network connections.
Provides instructions for loading paper into the printer's various trays.
Provides basic instructions for printing documents from applications.
Covers configuring various print-related settings via the printer driver.
Explains special printing features like Half Speed Mode and Line Thinning.
Explains the status and error messages shown on the printer's display.
Describes the function of each key on the operation panel.
Details how to navigate and use the printer's menu system for settings.
Setup and management of network connectivity and protocols.
Explains how to create, edit, and use custom boxes for storing print data.
Covers job retention functions like Quick Copy, Proof-and-Hold, Private Print, and Stored Job.
How to access and view the printer's current status information.
Details how to check the status of jobs currently printing or awaiting printing.
Step-by-step instructions for replacing the toner container.
Procedures for replacing the waste toner box.
Guides on cleaning the printer's interior components.
Lists common error messages and their corrective actions.
General guidelines and table for diagnosing and resolving common printer problems.
Instructions and locations for clearing paper jams.
Overview of optional hardware and software components for the printer.
Guidelines and specifications for selecting and using different types of paper.
To Next Page
