8-18
Troubleshooting > Troubleshooting
E
F
H
Message Checkpoints Corrective Actions
Reference
Page
Enter Account ― An account code must be entered.
This message is displayed if you try
to print from the operation panel
(e.g. printing a status page or using
the Job Retention function) when
the Job Accounting function is
enabled.
―
Error.Power off
F###
― Turn the power switch off and then
back on again. If this message still
remains, turn the power switch off,
and contact your service
representative or authorized service
center.
―
Error.Power off
F000
― The printer controller and operation
panel cannot exchange data. Turn
the power switch off and then back
on again. If this message still
remains, turn the printer off and
unplug it from the mains power
supply. Then contact your service
representative or authorized service
center. See the back page of this
manual for the relevant phone
numbers.
―
Exceeded Max. output
Press GO
― The printing count exceeded the
acceptable count restricted by Job
Accounting. Cannot print any more.
This job is canceled. Select the
[GO] key.
page 7-11
Message Checkpoints Corrective Actions
Reference
Page
Format SD card. Is the SD Card formatted by this
machine?
Perform [Format] on this machine. page 6-18
Message Checkpoints Corrective Actions
Reference
Page
High temperature.
Adjust room temp.
— Adjust the temperature and the
humidity of your room.
―