Kyocera ECOSYS P6026cdn

Using the Operation Panel
4-76
2 Press [OK]. A blinking question mark (?) appears.
3 Press  or  to select Quick Recovery or Energy Saver.
4 Press [OK].
5 Press [MENU]. The display returns to Ready.
Network (Setting for entering energy-saving mode when
connected to a network)
This sets whether or not the machine enters Energy Saver mode when
connected to a network.
1 After entering the administrator ID and password, press  or 
repeatedly until >>Network appears.
2 Press [OK]. A blinking question mark (?) appears.
3 Select On or Off using  or .
4 Press [OK].
5 Press [MENU]. The display returns to Ready.
>>Sleep Level
? Energy Saver
>>Network
? On