Printing Operation
2-4
Printing a Status Page
After completing the network settings, print a status page. The status
page allows you to confirm a range of information, including network
addresses and network protocols.
To print a status page, select Print Status Page from the Report Print
menu.
Refer to Report Print on page 4-11 for detailed information.
Command Center RX
If the machine is connected to the network, you can configure various
settings using Command Center RX.
This section explains how to access Command Center RX, and how to
change security settings and the host name.
For details on Command Center RX, refer to the Command Center RX
User Guide.
Settings that the administrator and general users can configure in
Command Center RX are as follows.
Note To fully access the features of the Command Center
RX pages, enter the User Name and Password and click
Login. Entering the predefined administrator password allows
the user to access all pages, including Document Box, and
Settings on the navigation menu. The factory default setting
for the default user with administrator privileges is shown
below.
* Upper case and lower case letters are distinguished
(case sensitive).
Setting Description
Administ-
rator
General
User
Device
Information
The machine's structure can be checked.
Configuration, Counter, About Command Center RX
Job Status Displays all device information, including print jobs and job log history.
Printing Jobs Status, Printing Job Log
Document Box Add or delete document boxes, or delete documents within a document
box.
Custom Box, Job Box Settings
Device Settings Configure the advanced settings of the machine.
Paper/Feed/Output, Energy Saver/Timer, Date/Time, System
—
Function
Settings
Configure the advanced function settings.
Common/Job Defaults, Printer, E-mail
—
Network Settings Configure the network advanced settings.
General, TCP/IP, Protocol
—
Security Settings Configure the security advanced settings.
Device Security, Network Security, Certificates
—
To Next Page
Loading...
