Printing
16 OPERATION GUIDE
NOTE: Ensure Print Instructions is selected to receive the instruction
sheet. Continue to use the sheet until you are familiar with this feature.
1
Ensure Cassette 1 is selected as
the Media Source in the print
Properties dialog box.
2
Select Print on Both Sides
(Manual Duplex).
Select Gutter Settings and enter
the value required for each edge.
Gutter width range: 5.00 to 25.4
mm (0.20 to 1.00 inch). Select
Reduce Image to fit as required.
Use the Duplex Details option to
select Flip on Long Edge for
binding on the long edge or Flip on Short Edge for binding on the short
edge. Select Print Instruction Page to receive the reloading instructions.
3
Select OK to return to the Print dialog box and select OK to start printing.
A Manual Duplex instruction message box displays.
4
Remove all the even pages
(including the instruction sheet)
from the output tray and load them
into the paper cassette, with the
instruction sheet facing up and
the arrows pointing toward the
printer.
NOTE: Nothing will be printed on the instruction sheet. If the paper is
curled, straighten it out before loading the paper in the cassette.
5
Select OK on the Manual Duplex instruction message box. All the odd
pages will be printed.
To Next Page
Loading...
