Maintenance
20 OPERATION GUIDE
4
Place the Drum Unit flat on a
clean, level surface.
IMPORTANT: Do not place the
Drum Unit on end.
5
Use a clean, lint free cloth to clean
dust and dirt away from the metal
Registration Roller (metal)
c.
IMPORTANT: Take care not to
touch the Transfer Roller (black)
d during cleaning.
6
Slide the Charger Cleaner (green)
back and forth 2 or 3 times to
clean the charger wire, then return
it to its original position.
7
When cleaning is complete, return
the Drum Unit to its position,
aligning the guides at both ends
with the slots in the printer.
8
Insert the Developer Unit together
with the Toner Container, back
into the machine.
Close the Top Cover.
d
c
To Next Page
Loading...
