Kyocera FS-C5025N - Page 35

2HJ/2JK-1
1-3-1
1-3 Maintenance Mode
1-3-1 Maintenance mode
The printer is equipped with various service mode that can be accessed with the MENU key operation on the operation
panel.
(1) Executing a maintenance item
>>Color
Calibration
>>Print
Test Page
>>Drum
Ready
Print
Menu Map
Others >
>MSG Language
English
>Service >
>>Print
Status Page
>>Print
Event Log
>>DEV-CLN
>>Maintenance
 Press the MENU key.
Message display
To print a status page for service purpose.
To print an event log (EVENT LOG).
(Displayed when FRPO I1 is set to 1)
To execute color calibration.
To print a test page.
To set paper feed operation as printer driver priority mode.
To reset the counter after replacing the maintenance kit.
To perform developer refreshing.
To perform drum surface refreshing.
 Press the  or  key several times
until [Others >] is displayed.
Service mode items
 Press the  key.
 Press the  key.
 Press the  or  key several times
until [>Service >] is displayed.
To scroll these
items,
press the  or 
key repeatedly.
>>Paper feed
Special
(See page 1-3-2)
(See page 1-3-9)
(See page 1-3-14)
(See page 1-3-14)
(See page 1-3-15)
(See page 1-3-15)
(See page 1-3-16)
(See page 1-3-17)