EasyManua.ls Logo

Kyocera FS-C5020N - User Manual

Kyocera FS-C5020N
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Basic Operation Guide
FS-C5020N
FS-C5030N

Other manuals for Kyocera FS-C5020N

Questions and Answers

  • S
    Stacy LangAug 16, 2025
    What to do if my Kyocera FS-C5020N says 'Replace toner C,M,Y,K Replace toner Clean printer'?
    • M
      Morgan AdamsAug 16, 2025
      If your Kyocera Printer displays a 'Replace toner C,M,Y,K Replace toner Clean printer' message, it means the toner has run out. Replace the empty toner container with a new toner kit for the indicated color.
  • E
    Emily CardenasAug 22, 2025
    How to troubleshoot a Kyocera Printer with completely blank printouts?
    • S
      Sandra MitchellAug 22, 2025
      If your Kyocera printer is producing completely blank printouts, open the printer top cover and check that the toner containers are correctly installed in the printer. Also, check that the application software is correctly operated.
  • R
    Richard LeeAug 25, 2025
    How to fix paper jam on Kyocera FS-C5020N?
    • M
      Mark WilliamsAug 26, 2025
      To fix a paper jam on your Kyocera printer, remove the jammed paper. After removing the jammed paper, the printer will restart printing automatically.
  • F
    fpotterAug 28, 2025
    Why is my Kyocera Printer not printing from the computer but prints a status page?
    • B
      Bradley OrtizAug 28, 2025
      If your Kyocera printer prints a status page but doesn't print jobs from the computer, check the printer cable or the interface cable, ensuring both ends are securely connected. You might also try replacing the printer cable or the interface cable. Also, examine program files and application software by printing another file or using another print command. If the problem occurs only with a specific file or application, check the printer driver settings for that application.
  • D
    David BellAug 31, 2025
    What to do if nothing lights up on my Kyocera FS-C5020N's operator panel?
    • K
      Kevin RomeroAug 31, 2025
      If nothing lights up on the operator panel of your Kyocera printer, even when the power is on and the fan makes no noise, first check that the power cord is properly plugged into the power outlet. Turn off the printer’s power, plug in the power cord securely, and try turning on the printer’s power again. Also, check that the power switch is in the On (|) position; if not, set the power switch to the On position.
  • A
    Adam MartinezSep 2, 2025
    What to do if my Kyocera FS-C5020N Printer says 'Add paper MPTray'?
    • M
      Matthew DelacruzSep 3, 2025
      If your Kyocera Printer displays the message 'Add paper MPTray', it indicates that the paper has run out in the paper source displayed. To resolve this, simply supply paper according to the paper source displayed.
  • T
    Tina MartinezSep 6, 2025
    What to do if my Kyocera FS-C5020N Printer is printing faint or blurred images?
    • A
      Ashley ScottSep 6, 2025
      If your Kyocera printer is producing faint or blurred prints, try the following: * Clean the main charger units. * Clean the advanced beam array lenses. * Make sure the paper type setting is correct for the paper being used. * Conduct color calibration either by switching the printer off then on or using the printer operator panel. * Try adjusting the color control settings using the printer driver. * If the Toner low (C/M/Y/K) message is displayed with color description, install a new toner kit for the color.
  • J
    jeffrey27Sep 9, 2025
    How to fix grey background on Kyocera FS-C5020N?
    • K
      Kimberly FergusonSep 9, 2025
      To address a grey background issue on your Kyocera printer, try the following: * Clean the main charger units. * Check the charger units installation. * Conduct color calibration either by switching the printer off then on or using the printer operator panel.
  • C
    Christina RobinsonSep 10, 2025
    What to do if my Kyocera Printer has black or white vertical streaks?
    • S
      Sarah ClarkeSep 12, 2025
      If your Kyocera printer is producing black or white vertical streaks, there are several possible solutions: * If the Toner low (C/M/Y/K) message is displayed with color description, install a new toner kit for the color. * Clean the main charger units. * Clean the advanced beam array lenses. * Refresh drum by performing the procedures on the operator panel and try cleaning the drum surface using the printer's built-in cleaning system.
  • T
    Timothy DeanSep 12, 2025
    How to fix skewed-color printout on Kyocera Printer?
    • M
      Mark BrownSep 12, 2025
      To correct a skewed-color printout on your Kyocera printer, conduct color registration using the printer operator panel.

Kyocera FS-C5020N Specifications

General IconGeneral
Print TechnologyLaser
Print Resolution600 x 600 dpi
Monthly Duty Cycle (Max)30, 000 pages
Standard Paper Capacity250 sheets
ConnectivityUSB 2.0, Ethernet
Operating System CompatibilityWindows, Mac OS, Linux
DisplayLCD
Processor400 MHz
Print Speed (Color)20 ppm
Print Speed (Black)20 ppm
Duplex PrintingAutomatic
Media TypeLabels
Media SizesLetter, Legal, A4, A5, B5

Related product manuals