Machine Parts
BASIC OPERATION GUIDE 2-5
Components at the Rear of the Printer
1 Vents
Air is purged through these vents to cool down the inside.
2 Memory Card Slot
This slot receives a memory card. A memory card can hold fonts,
macros, forms, etc., that can be downloaded in the printer’s
memory. For details, see the Options section of the Advanced
Operation Guide.
3 Power Cord Connector
This connector accepts the power cord supplied with the printer.
4 USB Interface Connector
This connector is a USB interface that conforms to the Hi-Speed
USB. Use a USB cable between this connector and the USB port
on a computer.
5 Network indicators
These indicators light according to the communication status with
the network.
Right: 10BASE-T/100BASE-TX indicator
Lights when you are connected to the network at 10 Mbps or 100
Mbps.
Left: Status indicator
Flashes during data communication.
1
3
7
5
8
6
4
2
To Next Page
Loading...
