What to do if my Kyocera FS-C5020N says 'Replace toner C,M,Y,K Replace toner Clean printer'?
If your Kyocera Printer displays a 'Replace toner C,M,Y,K Replace toner Clean printer' message, it means the toner has run out. Replace the empty toner container with a new toner kit for the indicated color.
How to troubleshoot a Kyocera Printer with completely blank printouts?
If your Kyocera printer is producing completely blank printouts, open the printer top cover and check that the toner containers are correctly installed in the printer. Also, check that the application software is correctly operated.
How to fix paper jam on Kyocera FS-C5020N?
To fix a paper jam on your Kyocera printer, remove the jammed paper. After removing the jammed paper, the printer will restart printing automatically.
Why is my Kyocera Printer not printing from the computer but prints a status page?
If your Kyocera printer prints a status page but doesn't print jobs from the computer, check the printer cable or the interface cable, ensuring both ends are securely connected. You might also try replacing the printer cable or the interface cable. Also, examine program files and application software by printing another file or using another print command. If the problem occurs only with a specific file or application, check the printer driver settings for that application.
What to do if nothing lights up on my Kyocera FS-C5020N's operator panel?
If nothing lights up on the operator panel of your Kyocera printer, even when the power is on and the fan makes no noise, first check that the power cord is properly plugged into the power outlet. Turn off the printer’s power, plug in the power cord securely, and try turning on the printer’s power again. Also, check that the power switch is in the On (|) position; if not, set the power switch to the On position.
What to do if my Kyocera FS-C5020N Printer says 'Add paper MPTray'?
If your Kyocera Printer displays the message 'Add paper MPTray', it indicates that the paper has run out in the paper source displayed. To resolve this, simply supply paper according to the paper source displayed.
What to do if my Kyocera FS-C5020N Printer is printing faint or blurred images?
If your Kyocera printer is producing faint or blurred prints, try the following: * Clean the main charger units. * Clean the advanced beam array lenses. * Make sure the paper type setting is correct for the paper being used. * Conduct color calibration either by switching the printer off then on or using the printer operator panel. * Try adjusting the color control settings using the printer driver. * If the Toner low (C/M/Y/K) message is displayed with color description, install a new toner kit for the color.
How to fix grey background on Kyocera FS-C5020N?
To address a grey background issue on your Kyocera printer, try the following: * Clean the main charger units. * Check the charger units installation. * Conduct color calibration either by switching the printer off then on or using the printer operator panel.
What to do if my Kyocera Printer has black or white vertical streaks?
General| Print Technology | Laser |
|---|---|
| Print Resolution | 600 x 600 dpi |
| Monthly Duty Cycle (Max) | 30, 000 pages |
| Standard Paper Capacity | 250 sheets |
| Connectivity | USB 2.0, Ethernet |
| Operating System Compatibility | Windows, Mac OS, Linux |
| Display | LCD |
| Processor | 400 MHz |
| Print Speed (Color) | 20 ppm |
| Print Speed (Black) | 20 ppm |
| Duplex Printing | Automatic |
| Media Type | Labels |
| Media Sizes | Letter, Legal, A4, A5, B5 |
To Next Page
