The FS-C5020N and FS-C5030N achieve excellent image quality for users in
today's demanding office Colour environments. Kyocera utilises a combination
of technological enhancements to achieve consistent image quality regardless
of the print volume generated. These enhancements include:
Multi-Bit Technology
This dithering technique enables
the FS-C5020/30N to achieve
high-quality output when printing
a variety of images, especially
continuous-tone photographs.
Additional benefits of this
technology include:
• Sharper Text
• Virtual Elimination of
Banding
• Smoother Gradations
Kyocera Fine Colour Technology (FCT)
FCT consists of the following innovative Kyocera Mita developed processes:
Advanced Beam Array, Touch Down Development, and Belt Transfer.
Advanced Beam Array
This advanced method, which is superior to LED printing, contributes
to the FS-C5020N and FS-C5030N’s small sizes. ABA can maintain
consistent crisp, sharp images because the Kyocera Advanced Beam Array
has controls to make uniform dots of light.
Touch Down Development
This unique system is based on the
combined advantages of mono (high-
quality) and dual (long-life)
component development. The
FS-C5020/30N’s Developing
Roller allows the toner to jump onto
the Drum, which increases drum life
and maintains high-quality imaging.
Belt Transfer
This Kyocera developed process significantly contributes to low TCO.
Since the paper never touches the Drum, wear and tear is reduced and
paper dust is eliminated, thus increasing the Drum life. In addition,
overlapping colours are consistently aligned since the four colour toners are
transferred to the paper at the same time. Plus, the Transfer Belt has a
tri-layer coating, which increases durability and smoother paper feeding.
FS-C5020N and FS-C5030N Product Guide
FS-C5016N
- 19 -
FS-C5020N and FS-C5030N Technology
To Next Page
Loading...
Need help?
General