Bowl
1. Lift the safety grid and add the ingredients in the bowl, close the safety grid
and switch on the main power on the back of the mixer, then turn the speed
controller to desired speed. Note: The mixer will only be ready to start when the
safety grid is closed, the emergency stop button is not pushed in and the speed
controller is at zero.
2. During mixing if you lift the safety grid the mixer will stop, to start mixing
again you need to rst close the safety grid and then turn the speed controller to
zero before selecting desired speed.
3. In the event that you have used the emergency stop button, you need to twist
the button clockwise to release it and then turn the speed controller to zero before
selecting desired speed to start mixing.
4. After completing mixing, hold in the reverse button for a few seconds, this can
help remove the dough more easily. If you reverse to long the dough will be
pushed upwards and may stick on the top of the spiral.
5. Always turn o the main switch on the back of the mixer after use or before
cleaning.
To Next Page
Loading...