Screen image bounces
or a wave pattern is
present in the image.
• Make sure the USB cable is properly connected
between the USB monitor and the computer.
• Move electrical devices that may cause
electrical interference.
Screen image has
color defects.
• Inspect the USB cable and make sure that none
of the pins are bent.
22
Problem Possible Solution
The screen ickers in
various colors when
starting up.
• Long press the power button for 3s to turn o the
monitor and restart it again.
• The second usb-c full-function port does not have
a data storage function, pls plugin the power
supply cable into the rst usb-c port, then the
parameters can be saved.
Unable to save
brightness and volume
parameters.
• Please make sure that HDR mode is turned o and
Scene(ECO) Mode is not adjusted
(Stay"Standard Mode").
Brightness/Volume
shows grey and can't
be adjusted.
To Next Page
Loading...