L-Acoustics LA4 - Page 92

Enclosure drive capacity per amplied controller
LA2Xi LA4X LA8 LA12X
per output
*
/ total
SE
#
BTL PBTL
per output
*
/ total per output
*
/ total per output
*
/ total
Kara II(i) 2 / 4 — 2 / 4 3 / 6 3 / 6
Kiva II 2 / 8 2 / 4 — 2 / 8 4 / 16 6 / 24
Kiva / Kilo — 2 / 8 3 / 12 3 / 12
Kudo — 1 / 1 3 / 3 3 / 3
V-DOSC — — 2 / 2 2 / 2
dV-DOSC — — 3 / 6 3 / 6
subwoofer enclosures
KS28 1 / 4 — 1 / 1 — — 1 / 4
SB28 1 / 4 — 1 / 1 — 1 / 4 1 / 4
KS21(i) 1 / 4 1 / 2 — 1 / 4
2 / 6
b
2 / 8
SB18(i/m) / SB18 IIi 1 / 4 1 / 2 — 1 / 4
2 / 6
c
3 / 12
SB218 — — 1 / 4 1 / 4
SB118 — 1 / 4 2 / 8 2 / 8
SB15m 1 / 4 1 / 2 — 1 / 4
2 / 6
d
3 / 12
Syva Low 1 / 4 — 1 / 4 1 / 4
2 / 6
e
Syva Sub 1 / 4 1 / 2 — 1 / 4 2 / 8 3 / 12
dV-SUB — — 1 / 4 1 / 4
b
LA8 can drive up to two KS21 or KS21i per output, but no more than six per controller at high level.
c
LA8 can drive up to two SB18, SB18i, SB18m or SB18 IIi per output, but no more than six per controller at high
level.
d
LA8 can drive up to two SB15m per output, but no more than six per controller at high level.
e
LA12X can drive up to two Syva Low per output, but no more than six per controller at high level.
*
For passive loudspeakers, the value corresponds to the number of enclosures in parallel on the output. For active
loudspeakers, the value corresponds to the number of sections in parallel on the output.
#
Maximum SPL is reduced in SE operating mode for all systems except X4i and 5XT. Refer to the LA2Xi Owner's
Manual for more information.
92 Preset Guide owner's manual (EN) version 16.0