L-Acoustics MTD 112 - Page 3

MTD 112 2 06/97
5.1 THE MTD 112 ENCLOSURE . . . . . . . p 26
a) External description (w.drawings) . . . . . . . p 26
b) Shipping . . . . . . . . . . p 27
c) Fittings (built-in) . . . . . . . . . p 27
d) Construction . . . . . . . . . p 28
5.2 THE MTD 112 LLCa LINE-LEVEL CONTROLLER . . . . p 28
a) External description (w.drawings) . . . . . . . p 28
b) Shipping . . . . . . . . . . p 28
c) Unpacking . . . . . . . . . . p 28
d) Rack mounting p 29
6.1 HARDWARE & ACCESSORIES MOUNTING(W.Drawings) . . . p 29
6.2 CONNECTORS/CABLES (W.Cable length chart.) . . . . p 30
6.3 CONTROLLER WIRING & KEY SELECTIONS (W.front & rear drawings) . p 31
6.4 SOUND SYSTEM DESIGN (w.drawings & recommendations) . . .
p 32
a).Passive, «processed» . . . . . . . . p 32
b) Single source . . . . . . . . . p 33
c) Speaker aiming . . . . . . . . . p 33
d) Subwoofer location . . . . . . . . .
p 34
6.5 PHASE CHECK . . . . . . . . . p 35
7.1 MTD 112 ENCLOSURE . . . . . . . . p 36
a) Periodic check . . . . . . . . . p 36
b) Phase check . . . . . . . . . p 36
7.2 MTD 112 LLCa . . . . . . . . . p 37
a) Fuse . . . . . . . . . . p 37
b) Other internal . . . . . . . . . p 37
7.3 MTD 112 LLCa SCHEMATICS . . . . . . . p 38
5. FEATURES . . . . . . . . . p 26
6. INSTALLATION AND WIRING . . . . . . . p 29
7 MAINTAINANCE & MISCELLANNEOUS . . . . . p 36