INTRODUCTION
Based on the circuit of the esteemed Para Acoustic DI,
the Align Equalizer combines our signature, high-graded
FET gain stage with powerful tone-shaping EQ that
injects richness and balance to any acoustic pickup
signal. A 6-band EQ shapes the frequencies we found
most useful for improving acoustic guitar pickups with
the exibility needed to cover other acoustic instru-
ments eectively. Multi-instrumentalists can incorporate
dedicated EQ pedals for level matching a variety of
instruments and tailoring a specic EQ for each one.
GETTING STARTED
1. Power the Equalizer with a 9V power supply or a 9V
battery.
2. Plug your guitar into the ¼” input to activate the
Equalizer (upper right hand side) and a cable into
the ¼” output (upper left hand side).
3. Adjust the gain using the gain switch. Read section D
in this manual for setting your gain to the appropriate
level.
4. Plug the ¼” cable into your amp, PA, or next pedal in
the signal chain and experiment with the Equalizer.
To Next Page
Loading...
