Need help?Do you have a question about the L.R. Baggs Active Di and is the answer not in the manual?
General| Channels | 1 |
|---|---|
| Power Supply | 9V Battery or Phantom Power |
| Polarity Reverse | Yes |
| Connectors | 1/4" Input, XLR Output |
| Ground Lift Switch | Yes |
| Frequency Response | 20 Hz - 20 kHz |
| Type | Active DI Box |
| Output Impedance | 600 Ω |
| Pad Switch | -15 dB |
| Construction | Metal Chassis |
| Weight | 1 lb |
The 1/4" input is an unbalanced, all-discrete input that activates the DI when plugged in.
The pad switch adjusts the XLR output level to 0dB, -10dB, or -20dB based on PA or amplifier needs.
Engage this switch to reduce or eliminate ground loop related noise.
Press this button to invert the phase for better sound and feedback resistance.
Press the footswitch to mute the signal. The red LED lights up when muted.
This switch bypasses circuitry when set to thru, and affects the signal when set to out.
An unbalanced, line level output that can plug into any amp or device with a 1/4" input.
A balanced XLR output for connecting to a mixing board with an XLR (mic) cable.
The DC power input uses a standard 2mm plug, recommended at 9VDC with a 12VDC maximum.
Register your Align Active DI online at Irbaggs.com/register.
L.R. Baggs warrants the product against defects in workmanship for one year.
To Next Page
