L.R. Baggs Active Di User Manual

SPECIFICATIONS
1/4” INPUT
Input Impedance: 2.2 Megohms
Preamp Gain: 0dB, -10dB, -20dB
Input Level: -25dBv to +8.5dBv (0.056Vrms to 2.651Vrms)
Frequency Response: 20Hz – 60kHz (-1dB point)
LINE OUTPUT
Output Level: +8.5dBv (2.651Vrms) Unbalanced
Output Impedance: 470 Ohms
DI OUT
Output Level: +8.5dBv (2.651Vrms) Balanced
Output Impedance: 620 Ohms
POWER
DC Power Consumption: 27mW Max at 9V
DC Current Draw: 2.8mA
Voltage Range: 7.5VDC – 12VDC
Power Supply: 9VDC with 100mA minimum
*IMPORTANT: polarity Pos (+) on outside, Gnd (-) on center
9V Battery Life: 180 hours
Phantom Power: 48V
Signal to Noise: 90dB, Unweighted
PHYSICAL CHARACTERISTICS
0.85 Lbs, 5” Length x 3.25” Width x 2” Depth
These specications may change without notice.

L.R. Baggs Active Di Specifications

General

Brand	L.R. Baggs
Model	Active Di
Category	Music Pedal
Language	English