Need help?Do you have a question about the L.R. Baggs Voiceprint D.I. and is the answer not in the manual?
Input Specifications| input impedance | 2.2 Megohms |
|---|---|
| input pad | 0dB, -3dB, -6dB, -9dB |
| input level | -25dBv to +6.24dBv (.053Vrms to 2.05Vrms) |
Effects Loops Specifications| send level | 0dBv (0.707Vrms) |
|---|---|
| output impedance | 600 Ohms |
| return level | 5.2dBv (1.414Vrms) Maximum before clipping |
| input impedance | 600 Kohms |
Output Specifications| di out output level | 0dBv (0.707Vrms) Balanced |
|---|---|
| di out output impedance | 600 Ohms |
| line out output level | 0dBv (0.707Vrms) Balanced |
| line out output impedance | 600 Ohms |
Power| dc power consumption | 4.5W Max @ 9V |
|---|---|
| voltage range | 9VDC – 16VDC |
| power supply | 9VDC with 500mA minimum (included) |
| signal to noise | 90dB, unweighted |
Digital Specifications| a/d and d/a conversion | 24-bit, 96kHz |
|---|---|
| dsp | 32-bit floating point DSP processing |
| bluetooth version | V4.2 up to 5.0 |
| iphone version | iPhone 6 and later |
Physical Characteristics| weight | 1.25 lbs |
|---|---|
| width | 5 inches |
| depth | 4.75 inches |
| height | 2.5 inches |
To Next Page
