L.R. Baggs Voiceprint D.I. User Manual

INTRODUCTION
Voiceprint DI measures the acoustic response of your guitar and leverages the processing power of your
iPhone® to accurately capture your guitar’s one-of-a-kind voice. A Voiceprint is created and loaded to
your Voiceprint DI pedal, replacing your pickup’s signal for the most accurate sonic performance we have
engineered in our 40+ years.
IMPORTANT
To use this product, it is necessary to use the Voiceprint DI with our AcousticLive™ app on your iPhone.
GETTING STARTED
1. Plug in a 9-volt DC power supply (provided).
2. Plug your guitar into the input of the Voiceprint DI (upper right hand side of the box).
3. Plug an output cable from your Voiceprint DI into your amp or PA to listen back to your Voiceprint after
you’ve made one.
4. Download the AcousticLive app from the App Store.
5. Make sure that you have your phone’s Bluetooth® turned on. Open the app, allow the app to access
your Bluetooth connection, and follow the on-screen instructions to pair the app and pedal together.
6. Create a Voiceprint using the app. Anti-Feedback settings will be created during this process as well.
Now you’re ready to play!
To learn more about the Voiceprint creation process, reference the AcousticLive app. To learn more about
the specics of the Voiceprint DI, continue on with this manual.

L.R. Baggs Voiceprint D.I. Specifications

Input Specifications

input impedance	2.2 Megohms
input pad	0dB, -3dB, -6dB, -9dB
input level	-25dBv to +6.24dBv (.053Vrms to 2.05Vrms)

Effects Loops Specifications

send level	0dBv (0.707Vrms)
output impedance	600 Ohms
return level	5.2dBv (1.414Vrms) Maximum before clipping
input impedance	600 Kohms

Output Specifications

di out output level	0dBv (0.707Vrms) Balanced
di out output impedance	600 Ohms
line out output level	0dBv (0.707Vrms) Balanced
line out output impedance	600 Ohms

Power

dc power consumption	4.5W Max @ 9V
voltage range	9VDC – 16VDC
power supply	9VDC with 500mA minimum (included)
signal to noise	90dB, unweighted

Digital Specifications

a/d and d/a conversion	24-bit, 96kHz
dsp	32-bit floating point DSP processing
bluetooth version	V4.2 up to 5.0
iphone version	iPhone 6 and later

Physical Characteristics

weight	1.25 lbs
width	5 inches
depth	4.75 inches
height	2.5 inches