Need help?Do you have a question about the L.R. Baggs ALIGN SERIES REVERB and is the answer not in the manual?
General| Type | Reverb |
|---|---|
| Technology | Digital |
| Modes | Room, Hall, Plate, Spring |
| Input Impedance | 1 MΩ |
| Power Supply | 9V DC (center negative) |
| Current Draw | 100 mA |
| Bypass | True Bypass |
| Controls | Decay, Tone, Level |
| Inputs | 1 x 1/4" |
| Outputs | 1 x 1/4" (mono) |
| Output Impedance | 100 Ω |
Alters the tone of the reverb, not the instrument, for present or subdued sounds.
The 1/4" input activates the Reverb; unplugging turns the system off.
Adjusts the length of the reverb tail for expansive or subtle acoustic reflections.
Press to engage effects; light indicates active state, off means true bypass.
Blends affected reverb signal with unaffected instrument signal; controls reverb amount.
Unbalanced, line level output for connecting to amps or devices with 1/4" input.
Master volume to balance engaged/bypassed signal; active when engage light is on.
Standard 2mm DC power input for 9VDC to 12VDC power supplies; activates the Reverb.
Details input impedance, preamp gain, and input level specifications.
Details output level and output impedance specifications.
Lists power consumption, current draw, voltage range, and battery life.
Provides dimensions and weight of the product.
Instructions to register the Align Reverb online at Irbaggs.com/register.
Details the one-year warranty against defects in workmanship and materials.
To Next Page
