SPECIFICATIONS
1/4” INPUT
Input Impedance: 2.2 Megohms
Preamp Gain: +6dB
Input Level: -25dBv to +5.7dBv (0.056Vrms to 1.944Vrms)
LINE OUTPUT
Output Level: +2.6dBv (1.343Vrms) Unbalanced
Output Impedance: 220 Ohms
POWER
DC Power Consumption: 450mW Max at 9V
DC Current Draw: 48mA
Voltage Range: 7.5VDC – 12VDC
Power Supply: 9VDC with 100mA minimum
*IMPORTANT: polarity Pos (+) on outside, Gnd (-) on center
9V Battery Life: 11 hours
Signal to Noise: 90dB, Unweighted
PHYSICAL CHARACTERISTICS
0.85 Lbs, 5” Length x 3.25” Width x 2” Depth
These specications may change without notice.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation.
To Next Page
Loading...
Need help?
General
