SIDE FEATURES
A. DC INPUT
The DC power input is designed for a standard 2mm
plug commonly used with eects pedals and “oor-
box” products. Most power supplies or multi-power
devices designed for musical products may be used.
9VDC recommended with a 12VDC maximum. Plugging
in a power supply will activate the Reverb.
G. VOLUME
The master volume will help you nd a balance between
your engaged and bypassed signal. It is only active
when the engage light is on. Keep in mind that the level
of the reverb control can aect this balance, so you may
need to adjust the volume as you adjust the eect.
A
To Next Page
Loading...