TOP FEATURES
A. Instrument Input
The ¼” input is an unbalanced (mono), all discrete input.
Plugging into the input will activate the Session DI,
therefore, unplugging will turn the system o. Be sure
to mute the signal before unplugging from the Session
DI to avoid a loud pop.
B. Gain
Setting the gain is one of the most important keys to
achieving optimum sound quality and signal-to-noise
ratio. If you have a volume control on your guitar, make sure
it is turned all the way up before setting the gain. Begin
with the gain control in the counter-clockwise position.
AJ
K
BI
DG
E
F
CH
To Next Page
Loading...
