Need help?Do you have a question about the L.R. Baggs SESSION DI and is the answer not in the manual?
The 1/4" input is an unbalanced, all discrete input.
Setting gain is key to optimum sound quality and signal-to-noise ratio.
Features 3 bands of compression for frequencies, responding to dynamics.
Engage the footswitch to mute both XLR and 1/4" outputs.
Helps control feedback by eliminating offending frequencies.
The master volume affects both the 1/4" and XLR outputs.
The 1/4" input is an unbalanced, all discrete input.
Setting gain is key to optimum sound quality and signal-to-noise ratio.
Features 3 bands of compression for frequencies, responding to dynamics.
Engage the footswitch to mute both XLR and 1/4" outputs.
Helps control feedback by eliminating offending frequencies.
The master volume affects both the 1/4" and XLR outputs.
General| Type | DI Box |
|---|---|
| Channels | 1 |
| Inputs | 1 x 1/4" (instrument) |
| Frequency Response | 20 Hz - 20 kHz |
| THD | < 0.1% |
| Signal to Noise Ratio | > 90 dB |
| EQ | 3-band EQ |
| Outputs | 1 x XLR, 1 x 1/4" |
| Input Impedance | 10 MOhm |
| Power Supply | 9V Battery or DC Power |
| Battery Life | Approximately 100 hours |
To Next Page
