L.R. Baggs SESSION DI - Line Output; High Pass Filter; Physical Characteristics

SPECIFICATIONS
1/4” INPUT
Input Impedance: 10 Megohms
Preamp Gain: -12dB to +26dB
Input Level: -25dBv to 1.8dBv (0.53Vrms to 1.23Vrms)
DI OUTPUT
Output Level: -1dBv (0.88VRms) Balanced
Output Impedance: 470 ohms
LINE OUTPUT
Output Level: -1dBv (0.88VRms) Unbalanced
Output Impedance: 470 ohms
POWER
DC Current Draw: 3mA
Power Supply: 9VDC with 100mA minimum
Voltage Range: 7.5VDC - 12VDC
9V Battery Life: 150 hours
Phantom Power: 48V
Signal to Noise: 90dB, unweighted
HIGH PASS FILTER
Frequencies: 40Hz, 80Hz, 120Hz, 200Hz
PHYSICAL CHARACTERISTICS
1.5Lbs, 6.25” Length x 4” Width x 1.75” Depth
These specications may change without notice.