SIDE FEATURES
A. DC INPUT
The DC power input is designed for a standard 2mm
plug commonly used with eects pedals and “oor-box”
products. Most power supplies or multi-power devices
designed for musical products may be used. 9VDC
recommended with a 12VDC maximum.
B. HPF (High Pass Filter)
The Session DI’s high-pass lter may be used to attenuate
extraneous low frequencies, allowing for an appropriate
mix in dierent playing situations and sound systems.
The variable “hpf” switches between 40, 80, 120 and
200Hz.
C. Ground Lift
Engage this switch to reduce or eliminate ground loop
related noise.
A B
C
To Next Page
Loading...
Need help?
General
