Operation
21
Program function
Cleaning the exterior
Turn off the water faucets after final use.
This will shut off the water supply to your washer and prevent the unlikely possibility of
damage from escaping water. Leave the lid open to allow the inside of your washer to dry
out.
Use a soft cloth to wipe up all detergent, bleach or other spills as they occur.
Clean the following as recommended:
Control Panel - Clean with a soft, damp cloth. Do not use abrasive powders or
pads. Do not spray cleaners directly on the panel.cleaning
Cleaning the detergent, bleach, softener compartments
You may find laundry product residue leftover in your compartments. To remove residue,
wipe with a damp cloth and towel dry. Do not attempt to remove the compartments or
trims for cleaning. The compartments and trims are not removable.
Storing your washer
Washers can be damaged if water is not removed from hoses and internal components
before storage.
Preparing your washer for storage as follows:
- Select the Quick wash cycle and add bleach to the washer. Run your washer through
the cycle without a load.
- Turn the water faucets off and disconnect the inlet hoses.
- Unplug your washer from the electrical outlet and leave your washer lid open to let air
circulate inside the drum.
- If your washer has been stored in below-freezing temperatures, allow time for any
leftover water in your washer to thaw out before use.
Cleaning the interior
Clean the interior of your washer periodically to remove any dirt, soil, odor, mold, mildew,
or bacterial residue that may remain in your washer as a result of washing clothes.
Failure to follow these instructions may result in unpleasant conditions, including odors
and/or permanent stains on your washer or laundry.
Hard water deposits may be removed, if needed. Use cleaners labeled “Washer safe”.
Tub clean
Tub clean is a self-cleaning cycle that removes mold that may occur
inside the washer.
1. Select the on Cycle selector.
- Once the is selected, the other
.
2. Press the button.
- If you press the button, Tub clean begins.
Using Tub clean, you can clean the tub and drum without using a
cleansing agent.
Tub clean
Tub clean function will be
automatically cancelled
Start/Pause
Start/Pause
Never use Tub clean cycle when laundry is in the washer.
This may cause damage to the laundry or a problem with the
washer.
CAUTION
Maintenance
22
Cycle Water Level Temp. Soil Level Delay (h) Fill up Extra Rinse
Auto Hot Extra Heavy
High Warm Heavy
Medium Cold Medium
Low Tap Cold Light
Drain & Spin
Heavy duty
Normal
0-24
Whites
Tub Clean
Bulky
Towels
Casual
Quick 28'
Delicates
Auto
Auto
Auto
Auto
Hot
Hot
Hot
Hot
Extra Heavy
Extra Heavy
Extra Heavy
High
High
High
High
Warm
Warm
Warm
Warm
Heavy
Heavy
Heavy
Heavy
Medium
Medium
Medium
Medium
Cold
Cold
Cold
Cold
Medium
Medium
Medium
Medium
Low
Low
Low
Low
Tap Cold
Tap Cold
Tap Cold
Tap Cold
Light
Light
Light
Light
Auto
High Warm Heavy
Medium Cold Medium
Low Tap Cold Light
Hot
Hot
Warm
Warm
Heavy
Medium
Medium
Cold
Cold
Medium
Medium
Low
Low
Tap Cold
Tap Cold
Light
Light
Means defult ○ Means optional — Means no selection
1:When you turn to one option which there is no beep notice. It means the function
can not be selected with this program.
–
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
High
●
●
–
–
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
–
Hot
●
–
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
–
Extra Heavy
●
–
●
●
●
●
●
●
–
–
–
●
●
0-24
0-24
0-24
0-24
0-24
0-24
0-24
0-24
0-24
● ●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
– –
–
Express
●
●
●
●
●
●
–
–
–
–
–
–
–
To Next Page