L2 LT52N1BWWC - Installation; Removing from the Package; Package List; Tools and Parts Needed in Installation

InstallationInstallation
Removing from the package
Remove the package and take out the machine from the carton box and foam cushion.
Open the lid of washer to take out all accessories including a protection foam.
Packaging materials can be dangerous to children;
Keep all packaging material (plastic bags, polystyrene, etc.) well out of children’s
reach.
Do not operate this appliance on the foam cushion.
- Failing to do so will result in serious vibration.
Package list
TOOLS and PARTS needed in installation
WARNING
Parts identification
Base foam cushion Protection foam
Hose holder
Owner’s manual
Pliers level
Water inlet hoses
Faucet and Water inlet hose
(Not supplied)
Power cord
water inlet valve
Drainage hole
Drainage hose and holder
Control panel
Top lid
Cabinet
Adjustable leg
Look through window
Bleach
compartment
Detergent compartment
Powder
Softener compartment
Drain hose
9
10
Door locker
flat screwdriver
Phillips screwdriver
Hose clamp+Screw
(x2)
Clamp