To Next PageTo Next Page
Need help?Do you have a question about the La Crosse Technology WS-8015U and is the answer not in the manual?
General| Brand | La Crosse Technology |
|---|---|
| Model | WS-8015U |
| Category | Weather Station |
| Display Type | LCD |
| Indoor Temperature Range | 32°F to 122°F (0°C to 50°C) |
| Outdoor Temperature Range | -40°F to 140°F (-40°C to 60°C) |
| Humidity Resolution | 1% |
| Transmission Range | 330 feet (100 meters) |
| Power (Receiver) | 2 x AA batteries |
| Power (Sensor) | 2 x AA batteries |
| Temperature Resolution | 0.1°F or 0.1°C |
Lists optional items required for operation.
Instructions for installing batteries in the sensor and weather station.
Steps for initial device startup and WWVB signal reception.
Outlines the steps for programming various settings on the device.
Guides users through setting the time, date, and 12/24 hour format.
Instructions for selecting a city to tailor weather data and time zone.
Provides a list of city codes for setting the weather station's location.
Explains how to set the time zone and daylight saving time preferences.
Details how to select units for temperature (°F/°C) and pressure (inHg/hPa).
Instructions for adjusting the brightness and contrast of the LCD screen.
Explains how to view and calculate daylight and moon times for locations.
Details the 12 moon phases and how to view them for specific dates.
How to view and reset min/max indoor and outdoor temperature/humidity.
Instructions for setting up and viewing data from multiple remote sensors.
How to activate, set, and cancel temperature alarms for remote sensors.
Explains the comfort level indicator based on temp and humidity.
Describes weather icons and pressure trend arrows for forecasting.
Explains the meaning of the three weather forecast icons displayed on the unit.
Describes the up/down arrows indicating air pressure changes and weather trends.
Instructions for setting up an alarm for significant drops in air pressure.
Explains the bar graph showing air pressure changes over the last two hours.
Details how to view and calibrate absolute and relative air pressure readings.
Explains the bar chart showing recorded air pressure over the past 30 hours.
Instructions for mounting the outdoor sensor using screws or adhesive tape.
Guidance on free-standing or wall-mounting the indoor weather station.
Solutions for faint LCD display and contrast problems.
Troubleshooting steps for missing outdoor temperature/humidity data.
Addresses issues with incorrect temperature, humidity, or pressure readings.
Solutions for problems with the radio-controlled time and date not updating.
