La Crosse Technology WS-8158U-IT User Manual (English)

To Next Page

WS-8158U-IT

RADIO-CONTROLLED CLOCK WITH OUTDOOR WIRELESS

TEMPERATURE AND WEATHER FORECAST

INSTRUCTION MANUAL

Contents

Language Page

__________________________________________________________________

English 1

French

Spanish

TABLE OF CONTENTS

Topic Page

Features 3

Battery Installation 4

Setting Up 5

Atomic time - WWVB Radio Controlled Time 5

Function keys 6

LCD Screen 6

Manual Settings 7

Changing the display mode 10

Alarm 10

Weather Forecast and Tendency 11

Outdoor transmitter 14

915 MHz Reception 14

Mounting 14

Care and maintenance 15

Specifications 16

Warranty 17

INSTANT TRANSMISSION is the state-of-the-

art new wireless transmission technology,

exclusively designed and developed by LA

CROSSE TECHNOLOGY. INSTANT

TRANSMISSION offers you an immediate

update (every 4 seconds!) of all your outdoor

data measured from the transmitters: follow

your climatic variations in real-time!

This product offers:

LCD1

display

Battery cover

Hanging holes

LCD2

display

Foldable stands

FEATURES:

RADIO-CONTROLLED CLOCK:

 WWVB Radio controlled time with manual time setting

 Time display: hour, minute, second

 Alarm setting with snooze function

 Calendar display

 Weekday display (3 languages to choose from: English, Spanish, French,)

 Time zone setting

 Daylight savings time ON/OFF option (DST)

 Indoor and outdoor temperature display

 Temperature display in ºF/ ºC selectable

 Weather forecast with weather tendency indicator based on air pressure

 Wireless transmission at 915MHz

 Signal reception intervals at 4 seconds

 Low battery indicator

 Wall mount or freestanding

OUTDOOR TEMPERATURE TRANSMITTER:

 Remote transmission of outdoor temperature to the

radio-controlled clock by 915 MHz signals

 Wall mounting case

Function keys

Holder

ALKALINE BATTERIES ARE RECOMMENDED FOR USE IN BOTH UNITS. AVOID USING

RECHARGEABLE BATTERIES.

TO INSTALL / REPLACE BATTERIES IN THE TEMPERATURE TRANSMITTER

(INSTALL BATTERIES IN TRANSMITTER BEFORE INSTALLING BATTERIES IN RADIO-

CONTROLLED CLOCK)

The transmitter uses 2 x AA,1.5V batteries. To install and replace the batteries, please follow

the steps below:

1. Remove the battery cover by pushing down towards bottom of transmitter and sliding

cover out.

2. Insert the batteries, observing the correct polarity (see marking inside battery

compartment).

3. Replace the battery cover on the unit.

TO INSTALL / REPLACE BATTERIES IN THE RADIO-CONTROLLED CLOCK

The radio-controlled clock uses 2 x AA,1.5V batteries. To install and replace the batteries,

please follow the steps below:

1. Insert finger or other solid object in the space at the bottom center of the battery

compartment and lift up to remove the cover.

2. Insert batteries observing the correct polarity (see marking inside battery compartment).

3. Replace compartment cover.

DO NOT SET THE CLOCK.

REPLACING BATTERY(S):

For best performance, batteries should be replaced at least once a year to maintain the best

running accuracy. Ensure that the batteries used are new and the correct size.

Please help in the preservation of the environment and return used batteries

to an authorized depot.

Need help?

Do you have a question about the La Crosse Technology WS-8158U-IT and is the answer not in the manual?

La Crosse Technology WS-8158U-IT Specifications

General

Brand	La Crosse Technology
Model	WS-8158U-IT
Category	Weather Station
Display Type	LCD
Indoor Temperature Range	32°F to 122°F (0°C to 50°C)
Outdoor Temperature Range	-40°F to 140°F (-40°C to 60°C)
Power Source (Sensor)	2 x AA batteries (not included)
Wireless Frequency	915 MHz
Humidity Range	1% to 99%
Wireless Transmission Range	330 feet (100 meters)
Power Source (Display)	2 x AA batteries (not included)