La Crosse Technology WT-3144S User Manual

Model: WT-3144S
DC: 072117
Power up
Select Time Zone and DST ON or OFF.
Insert 1 - AA battery into the movement.
For best reception, place clock on a wall that faces Ft.
Collins, Colorado.
During the night, your clock will set itself.
For information about WWVB, atomic time signal visit:
http://bit.ly/AtomicTime
IMPORTANT:
• Hands will move to 12:00 and search for the atomic
time signal.
• If no signal, after 8-10 minutes, clock will run from
12:00 am.
• Clock will continue to search for the WWVB atomic
time signal.
• Allow up to 5 nights for the clock to receive the atomic
time signal.
1.
2.
3.
4.
14 “ Atomic Wall Clock

La Crosse Technology WT-3144S Specifications

Battery

battery type	1 AA (IEC LR6)
battery life	over 12 months
battery recommendation	Alkaline recommended

Summary

Power Up and Signal Search

Initial Setup Steps

Steps for selecting time zone, inserting battery, and optimal placement for reception.

Atomic Signal Search Behavior

Details on hand movement, signal search, and expected time to receive the atomic signal.

Clock Operation, Features, and Support

Manual Time Setting

Instructions for manually setting the clock hands using the SET button.

Resetting the Clock

Procedure for resetting the clock movement if it becomes unresponsive.

Button Functions Overview

Identifies key buttons: SET, WAVE, RESET, Battery, Time Zone, DST Selector.

Battery and Maintenance

Information on battery requirements, cleaning contacts, and general maintenance.

Warranty and Customer Support

Details on the 1-year limited warranty and how to contact customer support.