Model: WT-3181PL-Q www.lacrossetechnology.com/support Page | 1
Model: WT-3181PL-Q
Instruction Manual
DC: 123114
18” Indoor/Outdoor Wall Clock
Get Started
Step 1: Remove round battery cover from the back of the clock.
Step 2: Insert 1 fresh AA, LR6 1.5 volt ALKALINE battery according to
the polarity marked on the case. The battery is a snug fit.
Step 3: Rotate the time set wheel to set the time.
Step 4: Place the round battery cover back on the clock.
Note: We recommend that you change the battery every 12 months to
maintain accuracy. Remove the battery when the clock will not be in use
for an extended period.
To Next Page
Need help?
General
