Page 3Page 2
Full manual can be found under the Support tab here: bit.ly/laxtech_support
POWER UP
ATOMIC TIME SIGNAL - WWVB
• Your Clock will automatically search for the Atomic Time Signal at
UTC 7:00, 8:00, 9:00, 10:00, and 11:00.
• Press the SET button to manually start or stop a search for the
WWVB Atomic Time Signal.
• The Tower Icon will flash while searching and remain solid on
screen when the WWVB Signal is received.
• For information about WWVB Atomic Time visit: bit.ly/AtomicTime
SETTINGS
TIME ZONE
AST = Atlantic
EST = Eastern
CST = Central
MST = Mountain
PST = Pacific
AKT = Alaska
HAT = Hawaii
1. Insert 2-AA batteries into your Wall Clock.
2. Configure your basic settings.
1. Hold the SET button to enter the Settings Menu.
2. Press the + or - button to adjust values.
3. Press the SET button to confirm and move to the next item.
Settings Menu Order:
• Language (English or Spanish)
• Beep ON/OFF
• Atomic ON/OFF
• Time Zone
• Daylight Saving Time (DST) ON/OFF
• Hour
• Minutes
• Year
• Month
• Date
• Fahrenheit/Celsius
Language: Whichever language is selected, the following
instructions and weekday will be presented in that language
Atomic OFF: When Atomic OFF is selected, you will move directly
to the Hour setting.
Weekday: The Weekday will set automatically when Year, Month
and Date are set.
ATOMIC DIGITAL WALL CLOCK
WITH INDOOR TEMPERATURE & HUMIDITY
MODEL: 5131417HAL
DC: 092523
AA
AA
Digital Clock
513-1417H-AL
To Next Page
Need help?
General
