Do you have a question about the La Crosse WT-8005U and is the answer not in the manual?
Time Display | Digital |
---|---|
Display | LCD |
Time Format | 12/24 Hour |
Atomic Time | Yes |
Time Signal Reception | WWVB |
Time Zone Setting | Yes |
Alarm | Yes |
Snooze | Yes |
Temperature Display | Yes |
Temperature Units | °F / °C |
Humidity Display | Yes |
Type | Atomic Clock |
Power Source | Battery |
Insert 2 fresh AA, LR6 1.5 volt Alkaline batteries according to polarity markings.
Remove batteries, press buttons 20 times, wait 15 mins if temp not displayed.
Enter time set mode, confirm adjustments, and adjust values for time, date, and 12/24 hour format.
Select time zone using the ZONE button and switch between Fahrenheit/Celsius using the °F/°C button.
Hold ALARM button to set time alarm, adjust values, and confirm.
Press ALARM button once to toggle alarm on or off. The alarm icon indicates status.
Press SNOOZE to silence an active alarm for 5 minutes. The alarm icon will flash.
Use a pen/paperclip to press RESET to restore default settings if display is distorted or unresponsive.
Press WWVB SEARCH to initiate a time signal search; WWVB icon flashes during search.
Details on Temperature Range, Power requirements, Battery Life, and Dimensions.
Guidelines for battery handling, cleaning, and general care to ensure optimal performance.
Provides details on the 1-year limited warranty and contact information for technical support.
Information regarding FCC compliance, interference, and operational conditions for the device.