To Next PageTo Next Page
Need help?Do you have a question about the La Crosse WS-8147U-IT and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Atomic Time | Yes |
| Indoor Temperature | Yes |
| Outdoor Temperature | Yes |
| Power Source (Sensor) | 2 x AA batteries (not included) |
| Time Zone Setting | Manual |
| Daylight Saving Time | Automatic |
| Temperature Units | °F / °C |
| Wireless Range | 330 feet |
| Time Display | 12 or 24-hour format |
| Time Signal Reception | Yes |
| Power Source | AC adapter or batteries |
| Temperature Range | -39.8°F to 139.8°F (-39.9°C to 59.9°C) Outdoor |
| Humidity Range | 20% to 95% RH |
Displays time, alarm status, WWVB signal, indoor/outdoor conditions, date, day, and moon phase.
Identifies rear components like battery compartment and foldout stand, and front buttons for operation.
Guide for inserting batteries into the sensor and clock, and placing the sensor in a shaded location.
Instructions for adjusting time, date, 12/24 hour format, and temperature units using SET and + buttons.
Procedure to set the alarm hour and minutes using the ALM and + buttons.
Instructions for activating/deactivating the alarm and using the snooze function to silence it temporarily.
Details on how to cycle through different display options using the + button.
Information on the WWVB icon behavior during signal search and reception.
Explains how the atomic clock searches for time signals and the display of moon phases.
How to interpret low battery icons and optimal placement for the outdoor sensor.
Guidelines on battery usage, mixing types, cleaning contacts, and proper installation.
Detailed technical data including temperature/humidity ranges, power, battery life, and dimensions.
Information on the product's limited warranty and how to contact support.
Details the FCC rules compliance, potential interference, and operating conditions for the device.
