EasyManuals Logo

La Marzocco Linea Technical Bulletin

La Marzocco Linea
1 page
Page #1 background imageLoading...
Page #1 background image
_____________________________________________________________________________________________
___________________________________________________________________________________________________________________________________________________________________________________________
Page 1 of 1
TECHNICAL REFERENCE 020705/37
TECHNICAL BULLETIN #37
February 7, 2005
Introduction of New Manual Brew Switch for all
EE Model Espresso Machines
La Marzocco has introduced a new manual switch for all EE model espresso machines. This new switch
will be supplied on all new machines and will also be supplied for all spare parts orders. This new switch
will replace the L287 manual brew switch. The new switch will be supplied with a bezel that will allow the
new switch fit into existing espresso machines. The installation of the new switch will require two (2)
holes to be drilled in the control panel. Please see picture below. Please order L283 if only the switch is
needed. Otherwise please order L283/C for the complete replacement kit.
L283/C – Switch kit, Manual brew, EE
Models Affected:
Linea – ALL
FB-70 – ALL

Other manuals for La Marzocco Linea

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the La Marzocco Linea and is the answer not in the manual?

La Marzocco Linea Specifications

General IconGeneral
TypeEspresso Machine
PID Temperature ControlYes
Body MaterialStainless Steel
Pump TypeRotary Pump
Group TypeSaturated
Voltage220V
Group Heads1 or 2

Related product manuals