EasyManua.ls Logo

La San Marco 20/20 PLUG&PLAY 1GR User Manual

La San Marco 20/20 PLUG&PLAY 1GR
94 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
20/20 PLUG&PLAY
IT USO E MANUTENZIONE
EN USE AND MAINTENANCE
FR EMPLOI ET ENTRETIEN
DE BEDIENUNG UND WARTUNG
COD. 7770.088 - REV. 03/20
La San Marco spa
Via Padre e Figlio Venuti, 10 - 34072
GRADISCA D’ISONZO (GO) - ITALY
Ph. (+39) 0481 967111
Fax: (+39) 0481 960166
www.lasanmarco.com
info@lasanmarco.com
Company with certi ed quality,
environmental, health and safety
management system according to
UNI EN ISO 9001
UNI EN ISO 14001
UNI EN ISO 45001
@lasanmarcospa
Question and Answer IconNeed help?

Do you have a question about the La San Marco 20/20 PLUG&PLAY 1GR and is the answer not in the manual?

La San Marco 20/20 PLUG&PLAY 1GR Specifications

General IconGeneral
CategoryCoffee Maker
Model20/20 PLUG&PLAY 1GR
BrandLa San Marco
TypeEspresso Machine
Number of Groups1
Voltage230 V
Boiler MaterialCopper
Pump Pressure15 bar
MaterialStainless Steel
Frequency50 Hz
Water SupplyPlumbed

Summary

1. Safety Instructions

1.1 Using the manual

Guidance on using the manual for machine installation, operation, and maintenance.

1.2 Safety instructions

General safety guidelines for machine operation, installation, and maintenance, including electrical safety.

1.2.1 Installation - Safety instructions

Specific safety requirements and procedures for correct machine installation.

1.2.2 Use of the machine - Safety instructions

Key safety instructions for operating the machine, including user responsibilities and prohibited actions.

1.2.4 Maintenance - Safety instructions

Safety precautions for routine maintenance and repair operations.

2. Technical Characteristics

3. Machine Description

4. Installation

4.1 Water connection of the machine

Instructions for connecting the machine to the water supply for automatic and manual models.

4.2 Connection to equipotential clamp

Details on connecting the machine to the equipotential clamp for safety purposes.

4.3 First installation and automatic filling of coffee boiler

Procedure for initial machine setup and automatic filling of the coffee boiler.

5. Operating Instructions

5.1 Espresso coffee brewing

Step-by-step guide on brewing espresso using programmed and manual doses.

5.2 Pre-infusion mode

Explanation of how to enable or disable pre-infusion mode for coffee dispensing.

5.3 Drawing hot water

Instructions for dispensing hot water for various uses like infusions and heating cups.

5.4 Drawing steam

Procedure for dispensing steam for frothing milk or heating liquids, including safety warnings.

5.5 Automatic washing system

Guide on activating the automatic washing cycle for cleaning coffee brewing groups.

6. Using the display keyboard

Screen Navigation and Menus

Overview of initial, ready, brewing screens, and accessing programming menus via the display.

Dose Programming

Instructions for programming coffee doses (short, long, single, double) via the display interface.

Boiler Temperature and Preinfusion Settings

How to adjust boiler temperature and configure preinfusion settings using the display.

Counters, Language, and Maintenance Settings

Viewing coffee counters, selecting language, and configuring maintenance warnings.

Alarm Screens

Description of alarm screens for technical service, water level, and boiler temperature issues.

7. Routine Maintenance

7.1 Daily cleaning of the coffee dispensing group

Detailed steps for daily cleaning of the coffee dispensing group, tray, and steam spout.

7.2 Cleaning the tray and the cup support grill

Instructions for cleaning the cup support grill and drip tray.

7.3 Cleaning the steam spout

Procedure for cleaning the steam spout to remove milk or other residues.

7.4 Washing of water tub

Instructions for removing, washing, and reinserting the water tub.

7.5 Softening

Information about the machine's water softeners and their replacement schedule.

8. Display of Alarms

8.1 Model with automatic supply of water tub

Description of alarms for models with automatic water supply and how to reset them.

8.2 Model with automatic supply of the water tub

Explanation of alarms for models with water tub level sensors and their reset procedures.

9. Information for users in the european community

10. General terms of warranty

11. Problem Solving

Related product manuals