To Next PageTo Next Page
Need help?Do you have a question about the La San Marco TOP 85 and is the answer not in the manual?
General| Boiler Material | Copper |
|---|---|
| Steam Wand | Yes |
| Body Material | Stainless Steel |
| Type | Espresso Machine |
| Number of Groups | 2 |
| Power | 3000 W |
| Water Supply | Plumbed |
Guidance on how to effectively use the user manual.
Crucial safety and operational warnings.
Specifies ambient temperature, water pressure, and hardness.
Identifies main parts of the espresso machine using a legend.
Lists all items included in the machine's packaging kit.
Instructions for connecting the machine to water supply and drain lines.
Importance and connection of a water softener for machine performance.
Connecting the water system for models with an internal pump.
Connecting the water system for models with an external pump.
How to connect the machine's drainage tube.
Diagrams for connecting power cords to electrical mains.
Step-by-step procedure for filling the boiler with water.
How to adjust and calibrate the coffee pump pressure.
Adjusting the steam pressure in the boiler.
Adjusting the serving group temperature.
Step-by-step guide for preparing espresso coffee.
How to use programmed buttons for coffee brewing.
Using continuous dose buttons for brewing.
How to dispense steam for frothing milk or heating liquids.
How to dispense hot water for beverages.
How to use the optional cup heating function.
How to navigate and access different programming menus.
Setting specific coffee dose volumes for each button.
Transferring programmed doses between units.
Setting and adjusting the boiler operating temperature.
Setting the machine's current date and time.
Setting daily automatic start-up times.
Setting daily automatic shut-down times.
Setting a specific day for the machine to remain inactive.
Customizing the cup tray LED lighting color and status.
Displaying the total volume of water dispensed.
Reading the total number of coffees brewed.
Tracking individual dose counts per unit.
Displays the machine's software version and model information.
Configuring the presence or absence of an infuser on units.
Choosing the display language for the machine interface.
Configuring user name or date display options.
Setting a service contact number for technical support.
Enabling or disabling the ability to change programmed doses.
Enabling or disabling continuous dispensing mode.
Activating or deactivating the cup tray lighting feature.
Enabling or disabling the preinfusion function for brewing.
Setting preinfusion times for individual doses.
Configuring alerts for water softener filter replacement.
Adjusting the acceptable deviation for programmed doses.
Setting the minimum limit for counter alarms.
Restoring the machine to factory default settings.
Indicates a malfunction in the machine's impulse counters.
Signals that the water softener filter needs replacement.
Indicates when the machine requires technical service.
Signals low or high water levels in the boiler.
Alerts for boiler temperature issues or probe faults.
Alerts for incorrect grinding or dose parameters.
Signals issues with the water counter detection.
Warns of a potential loss of water from the machine.
Alarms related to the volumetric counter function.
Alerts for issues with the automatic boiler water level.
Signals that the boiler water level is too high.
Alerts for temperature sensor faults or issues.
Procedure for cleaning brewing units and filter holders.
Instructions for cleaning the drip tray and cup support.
How to clean the steam dispensing spout.
Information on the manual reset safety thermostat.
Information and actions for the safety valve.
