Need help?Do you have a question about the La San Marco PLUS 5 and is the answer not in the manual?
General| Brand | La San Marco |
|---|---|
| Model | PLUS 5 |
| Category | Coffee Maker |
| Language | English |
Procedure to access programming environments using a 5-digit password.
How to access programming environments by placing a smart card on the reader.
Details programmable parameters for dose adjustment and setting.
Lists parameters for configuring machine components like pump type and boilers.
Covers parameters like language, water tank, and temperatures.
How to read dose counters (A/B) and view dispensed quantities and cleaning cycles.
Procedure to reset dose counters, extra milk, and total cashing data.
Adjusting slight parameters for drink doses, like grind time and water volume.
Adjusting parameters for steamed milk, foamed milk, and milk pump speed.
Selecting drink types (Coffee, Milk, Soluble, etc.) for programming.
Table listing parameters for coffee, coffee+soluble, and coffee+milk drinks.
Table listing parameters for milk, milk+soluble, and milk+coffee drinks.
Setting prices for individual doses.
Procedure for calibrating the milker (steamed/foamed milk) and grinders.
Setting default density values for products A and B.
Calibrating the instant dispenser for Product A.
Calibrating the instant dispenser for Product B.
Setting water filter replacement alarms and service frequency.
Managing the machine's system code and its relation to card codes.
Procedure for loading credit onto smart cards.
Step-by-step guide to changing passwords for different user roles.
Testing pump, grinder, solenoid valve, and bypass actuators.
Testing coffee heater, air break solenoid valve, and mixer solenoid valves.
Testing steam heater, steam milker solenoid valve, and fill-up solenoid valve.
Testing milk pump speed and direction.
Detailed testing of coffee heater and solenoid valves.
Detailed testing of steam heater and solenoid valves.
Testing milk pump speed and spin direction.
Testing the speed of the Mixer A motor.
Testing the speed of the Dispenser A motor.
Testing the speed of the Mixer B motor.
Testing the speed of the Dispenser B motor.
Testing the exhaust fan by switching it on and off.
Table listing alarm details and their corresponding codes.
Explains the effects of Service, Technician, and Factory presets.
Diagnosing and resolving upper piston motor time-out alarms.
Diagnosing and resolving lower piston motor time-out alarms.
Diagnosing and resolving upper motor error alarms.
Diagnosing and resolving lower motor error alarms.
Addressing alarms related to too much coffee in the brewing chamber.
Diagnosing and resolving boiler filling time-out alarms.
Addressing coffee boiler temperature timeout alarms.
Addressing steam boiler temperature timeout alarms.
Diagnosing leakage from the coffee hydraulic circuit.
Addressing coffee boiler temperature limit alarms.
Addressing steam boiler temperature limit alarms.
Diagnosing flowmeter signal timeout or continuous dispensing issues.
Addressing flowmeter time-out problems during infusion.
Resolving corrupted data alarms affecting machine function.
Diagnosing mechanical blocks in mixer, dispenser, or milk pump motors.
Understanding safety valve operation due to overpressure.
Diagnosing steam boiler cutoff due to high temperature or thermostat issues.
Adjusting coffee dispensing pressure using a pressure gauge.
Adjusting the coffee grinding degree for finer or coarser grounds.
Adjusting coffee outlet flow for dispensing speed and cream amount.
To Next Page
