Need help?Do you have a question about the Lab599 Discovery TX-500 and is the answer not in the manual?
General| Output Power | 5 W |
|---|---|
| Display | LCD |
| Waterproof Rating | IP54 |
| Antenna Connector | BNC |
| Type | Transceiver |
| Operating Modes | SSB, CW, AM, FM |
Breakdown of the main display layout, information bars, and function buttons.
Describes protection against incorrect voltage input and polarity.
Details the transceiver's thermal protection mechanism during transmit.
Explains how the device protects itself from high SWR conditions.
Guide for connecting power, speaker-microphone, and antenna.
Instructions on how to access and use the device's menu system.
Details on incremental tuning for receive (RIT) and transmit (XIT).
Configuration options for transmit audio, power, VOX, and keying.
Configuration for RF gain, squelch, IF DSP, and filter adjustments.
Guide on connecting to a PC and updating the transceiver's firmware.
Configuration of VFO encoder modes and receiver IF DSP.
Adjustments for CW sidetone pitch, speed, weight, and key type.
Setting the Automatic Gain Control time constant and RF gain levels.
Adjusting transmit power, microphone/digi gain, and noise reduction.
Configuring the noise blanker and squelch thresholds for different modes.
To Next Page
