Chapter 3: Getting Started
Product Service 816-333-8811 or 1-800-522-7658
IF YOUR FREEZE DRYER WAS DAMAGED IN TRANSIT,
YOU MUST FILE A CLAIM DIRECTLY WITH THE FREIGHT
CARRIER. LABCONCO CORPORATION AND ITS DEALERS
ARE NOT RESPONSIBLE FOR SHIPPING DAMAGE.
DO NOT DISCARD THE CARTON OR PACKING MATERIAL
FOR YOUR FREEZE DRYER UNTIL YOU HAVE CHECKED
ALL OF THE COMPONENTS AND INSTALLED AND TESTED
THE FREEZE DRYER.
Freeze Dryer Components
Verify that the components listed below are present and undamaged.
See parts list (Appendix A)
If you did not receive one or more of the components listed for your Freeze Dryer,
or if any of the components are damaged, contact Labconco Corporation
immediately for further instructions.
Setting Up Your Freeze Dryer
After you verify receipt of the proper components, move your Freeze Dryer to the
location where you want to install it. Then, follow the steps listed below.
To Next Page
Loading...
Need help?
General
