68
About
Displays Operating System information such as the software version, the Catalog
Number and Serial Number. System updates via USB can be performed from the
About screen. Reference Fig. 6-29.
Software Update via USB Thumbdrive
To update the software via USB, you must first down-load the latest version, available at
Labconco.com to a USB thumbdrive.
From the About screen, touch [Update].
Insert the flash drive into the USB port located under the display screen.
Once the system recognizes the flash drive, touch [OK].
The software will automatically copy the software bundle, unpack it and install the
software update. The system will notify you when the upload is complete and
successful.
Remove the thumbdrive from the USB port.
Figure 6-29
To Next Page
Loading...