LabelTac Pro X - Ethernet Configuration; Bluetooth Settings

LabelTac
®
Pro X | REFERENCE GUIDE
Menu Interface Ethernet
DHCP
Status
Static IP
Congure
Ethernet
Use this menu to congure internal Ethernet conguration check
the printer’s Ethernet module status, and reset the Ethernet module.
Item Description Default
Status
Use this menu to check the Ethernet IP address and MAC setting status.
N/A
DHCP
This item is used to ON or OFF the DHCP (Dynamic Host Conguration
Protocol) network protocol.
N/A
Static IP
Use this menu to set the printer’s IP address, subnet mask and gateway.
ON
Menu Interface Bluetooth
Bluetooth Name
Bluetooth PIN Code
Bluetooth
This option is used to set the printer blustooth settings.
Item Description Default
Bluetooth Name
This item is used to set the local name for Bluetooth.
BT-SPP
Bluetooth PIN Code
This item is used to set the local PIN code for Bluetooth.
0000