LabelTac Pro X - Diagnostics and Testing; Print Configuration Details

LabelTac
®
Pro X | REFERENCE GUIDE
Menu
Dump Mode
Display
Print Cong.
Diagnostics
Print Head
Sensor
Diagnostics
Menu
Diagnostics Print Cong.
Print Conguration
This feature is used to print current printer conguration to the la-
bel. On the conguration printout, there is a print head test pattern,
which is useful for checking if there is any dot damage on the print
head heater element.
Self-test printout
Model name
F/W version
Firmware checksum
Printer S/N
Conguration le
System date
System time
Printed mileage (meter)
Cutting counter
Print speed (inch/sec)
Print darkness
Label size (inch)
Gap diestance (inch)
Gap/black mark sensor
intention
Code page
Country code