LabelTac Pro X - Wi-Fi Connectivity; File Manager Operations

LabelTac
®
Pro X | REFERENCE GUIDE
Menu Interface
Scan AP
Operation Mode
Wi-Fi
DHCP
Wi-Fi
Item Description Default
Operating
This item is used to set the operating mode of wireless local area networks to
connect devices to the networks.
Note:
Infrastructure mode requires the use of an access point for this
communication to take place.
Ad hoc mode involves connecting a computer directly to another computer.
Infrastructure
Scan AP
This item is used to scan the access point devise
N/A
DHCP
This item is used to ON or OFF the DHCP (Dynamic Host Conguration
Protocol) network protocol.
ON
Menu
FLASH
DRAM
File Manager
CARD
File Manager
This feature is used to check the printer available memory and le list.
Item Description
DRAM
Use this menu to show, delete and run (.BAS) the les saved in the printer
DRAM memory.
FLASH
Use this menu to show, delete and run (.BAS) the les saved in the printer
Flash memory.
CARD
Use this menu to show, delete and run (.BAS) the les saved in the printer
Card memory.